 |
Applications:
|
Compact power packs are suitable for industrial or mobile applications using operating pressures up to 300 bar (4350 psi). Thanks to the modular design of compact power packs, they can be used for a virtually unlimited number of customized applications. The principle uses of compact power packs are, among others: in material handling and warehouse equipment, docking equipment, car lifts for garages, human lifting applications, building cranes, machining tools. |
Product Range:
|
ME - Smallest overall dimensions
DC and AC electric motors
DC 12/24V up to 2200 W
AC single or 3-phase up to 1100 W (1,5 hp)
Pressures up to 250 bar (3625 psi)
Pump displacement up to 1,5 cm³ (0,09 in³)
Flows @ 1500 rpm up to 2,25 l/min (0,6 gpm) |
K - Standard applications
DC and AC electric motors
DC 12/24V up to 3000 W
AC single or 3-phase up to 4000 W (5,5 hp)
Pressures up to 300 bar (4350 psi)
Pump displacement up to 9,9 cm³ (0,6 in³)
Flows @ 1500 rpm up to 14,8 l/min (3,91 gpm) |
KE - Complex circuits, direct flange AC motors
DC and AC electric motors
DC 12/24V up to 3000 W
AC single or 3-phase up to 4000 W (5,5 hp)
Pressures up to 300 bar (4350 psi)
Pump displacement up to 9,9 cm³ (0,6 in³)
Flows @ 1500 rpm up to 14,8 l/min (3,91 gpm) |
KS - Designed for lifting applications
DC and AC electric motors
DC 12/24V up to 3000 W
AC single or 3-phase up to 4000 W (5,5 hp)
Pressures up to 300 bar (4350 psi)
Pump displacement up to 9,9 cm³ (0,6 in³)
Flows @ 1500 rpm up to 14,8 l/min (3,91 gpm) |
ZL - Industrial applications
AC electric motors
AC single or 3-phase up to 7500 W (10 hp)
Pressures up to 300 bar (4350 psi)
Pump displacement up to 22,8 cm³ (1,39 in³)
Flows @ 1500 rpm up to 51,7 l/min (13,66 gpm) |
IM - Oil immersed motor
AC electric motors
AC single or 3-phase up to 5200 W (7 hp)
Pressures up to 300 bar (4350 psi)
Pump displacement up to 22,8 cm³ (1,39 in³)
Flows @ 1500 rpm up to 34,2 l/min (9,03 gpm) |
» Download Catalog RE 00163/08.06 - Size 1.5 Mb |
 |
Introduction:
|
Oil Sistem, the power module’s division in Bosch Rexroth Oil Control, is a leader in production of hydraulic compact power units and offers a wide range of solutions suitable for every type of application. Oil Sistem developed in years of experience a high evoluted modular system that became powerful, flexible and economically competitive. This catalogue is intended to be an almost complete reference for the available power modules types. In its easier configuration a power module is an assembly of electric motor, pump, central manifold with valves, oil tank and few other connection elements. You will notice that a large variety of driving circuits would be realizable with only the central manifold and its built-in valves. If more complex circuits are needed, modular blocks will be mounted on the central manifold to extend
its capabilities. |
| Typical Applications: |
- Passenger lift
- Tail gate
- Material handling
- Fork lift
- Scissor lift
- Press machine
- Car and motorcycle lift
|
- Tyre changer
- Dock leveller
- Lift table
- Home lift
- Building crane
- Dumper
- Gangway and davits for boats |
| General Characteristics |
Max working pressure: From 150 to 300 bar (from 2175 to 4350 psi), according to pump version.
Pump type: External gear pump.
Pump displacement: From 0,18 cm3/rev to 9,9 cm3/rev (from 0,01 to 0,6 in3/rev).
Electric motors: D.C. from 150 to 3000 W, A.C. from 90 to 4000 W (from 0,12 to 5,35 hp)
Oil tank capacity: From 0,5 to 60 litres (from 0,13 to 15,85 gal) |
» Download Catalog RE 00198/02.07 - Size 22.0 Mb |
| |
| |
| |
| |